Lattice Semiconductor Corporation

You are here : Micrium : Lattice Semiconductor Corporation

µC/OS-II ports

Application notes

Evaluation Boards

µC/FS ports

µC/TCP-IP ports

uC/USB ports

µC/OS-II ports

All µC/OS ports can easily be ported to µC/OS-II. If you port µC/OS-II to a processor not listed and want to include your port on this web site, please contact Micrium at Micrium. Note that the ports are provided as is with the exeption of the Micrium ports which are supported by Micrium.

Note that in most cases only the PORT is provided and it is assumed that you have the rest of the source for µC/OS-II from the book or the upgrade. In cases where the µC/OS-II source code is included, you will need to be a registered member and be logged in before you can download the file.

Download
Processor
OS version
Compiler
Contributor

ReadMe:

Project:

LatticeMico32

 2.85 GNU

Application notes

Evaluation boards

Board
Description
Download

LatticeMico32/DSP Development Board for LatticeECP2

Example µC/OS-II-based projects are available for the LatticeMico32/DSP Development Board. This board features a LatticeECP2-50 FPGA device, 2x128 Mbit Flash, 2x4 Mbit SRAM, a RS-232 serial port, a 15-pin VGA connector, 10/100 Ethernet, 2 USB host connectors, and one USB OTG connector. The user interface components include 8 LEDs, 4 DIP switches, a 3x4 keypad and a 7-segment display.

Micrium has one project targeted to this board. This project uses µC/OS-II and µC/Probe. This application will blink the LEDs, and µC/Probe can be used to monitor global variables in the application via the board's RS-232 port.

To download a trial version of µC/Probe, please visit the this page.

For more information about this evaluation board, please visit the Lattice website:

ReadMe:

Project:

µC/FS ports

µC/TCP-IP ports

µC/USB ports

 

© www.Micrium.com