 |
ADSP-BF537 EZ-KIT Lite Evaluation platform
The ADSP-BF537 features:
- Up to 600MHz High Performance Blackfin processor
- 132KB of on chip full speed SRAM
- 10-stage RISC MCU/DSP pipeline with mixed 16-/32-bit ISA for optimal code density
- Powerful and flexible cache architecture suitable for soft real-time control tasks and industry-standard operating systems, plus hard real-time signal processing
- Full SIMD architecture, including instructions for accelerated video and image processing
- Embedded IEEE 802.3 Compliant 10/100 Ethernet MAC with buffered oscillator output to a separate PHY
- Controller Area Network (CAN) 2.0B interface
- Two-Wire Interface Controller
- Glueless Video Capture/Display Port
Micrium has one project targeted to this board. The project corresponding to AN-1530 uses µC/OS-II and µC/Probe. The user LEDs blink, controlled by push button switches or by a given delay. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page. |
AN-1530: Download
Download
|
 |
ADSP-BF533 EZ-KIT Lite Evaluation platform
The ADSP-BF533 features:
- Up to 756 MHz performance
- 1512 MMACs/second
- Application-tuned peripherals provide glueless connectivity to general-purpose converters in data acquisition applications
- Large on-chip SRAM for maximum system performance
Micrium has one project targeted to this board. The project corresponding to AN-1533 uses µC/OS-II and µC/Probe. The user LEDs blink, controlled by push button switches or by a given delay. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page. |
AN-1533: Download
Download
|
 |
ADSP-BF548 EZ-KIT Lite Evaluation platform
The ADSP-BF548 features:
- Blackfin® Processor Core with up to 600Mhz (1200 MMACS) performance
- Lockbox™ Secure Technology: Hardware-enabled security for code and content protection.
- Two independent DMA controllers
- Multimedia: Multiple Enhanced Parallel Peripheral Interfaces (EPPI), Pixel Compositor hardware accelerator
- Human Interface: 18/24-bit LCD Controller 32-bit Up/Down counter / Thumbwheel interface, 8x8 Keypad interface
- Connectivity: High Speed USB OTG , Host DMA, UARTs, SPORTs, SPI, TWI, and CAN
- Expansion: SD/SDIO and ATAPI-6 Controllers
- Synchronous memory interface for DDR / Mobile DDR connectivity
- Asynchronous memory interface for SRAM, EEPROM, NAND/NOR, Flash connectivity
Micrium has one project targeted to this board. The project corresponding to AN-1548 uses µC/OS-II and µC/Probe. The user LEDs blink, controlled by push button switches or by a given delay. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page. |
AN-1548:
Download
Download
|
 |
ADSP-BF527 EZ-KIT Lite Evaluation platform
The ADSP-BF527 features:
- Lockbox™ Secure Technology: Hardware-enabled security for code and content protection.
- Blackfin Processor Core with up to 600 MHz (1200 MMACS) performance
- 2 dual-channel, full-duplex synchronous serial ports supporting 8 stereo I2S channels
- 12 peripheral DMA channels supporting one- and two-dimensional data transfers
- NAND Flash Controller with 8-Bit interface for commands, addresses and data.
- Connectivity: HS USB 2.0 OTG, Host DMA Port, UART’s, SPORT’s, SPI and TWI.
- Ethernet 10/100 MII interface
- Memory controller providing glue-less connection to multiple banks of external SDRAM, SRAM, Flash, or ROM
- 289-ball, 12x12 mm, 0.5 mm pitch mini-BGA (Commercial temperature range 0°C to +70°C)
- 208-ball, 17x17 mm, 0.8 mm pitch mini-BGA (Commercial temperature range 0°C to +70°C; Industrial temperature range -40°C to +85°C*)
* 533 MHz max operating speed
Micrium has one project targeted to this board. The project corresponding to AN-1527 uses µC/OS-II and µC/Probe. The user LEDs blink, controlled by push button switches or by a given delay. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page. |
AN-1527:
Download
Download
|
 |
ADSP-BF561 EZ-KIT Lite Evaluation platform
The ADSP-BF561 features:
- Dual Blackfin cores with each core capable of 600 MHz/1200 MMACs (2400 MMACs total) for demanding signal processing applications.
- Large On-Chip Memory of 328 KBytes – arranged as individual L1 memory systems for each core plus a shared L2 memory space.
- High data throughput tailored for the needs of imaging and consumer multimedia applications.
- Application Tuned Peripherals provide glueless connectivity to a variety of audio/video converters and general-purpose ADCs/DACs.
Micrium has one project targeted to this board for a single Core configuration. The project corresponding to AN-1561 uses µC/OS-II and µC/Probe. The user LEDs blink, controlled by push button switches or by a given delay. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page. |
AN-1561:
Download
Download
|
 |
ADSP-BF518F EZ-KIT Lite Evaluation platform
The ADSP-BF518 features:
- Blackfin processor core with up to 400 MHz (800 MMACS) performance
- 4 Mbit SPI Flash
- 2 dual-channel, full-duplex synchronous serial ports supporting 8 stereo I2S cha
- 12 peripheral DMA channels supporting one- and two-dimensional data transfers
- Ethernet 10/100 MII interface with IEEE1588 v2 support
- Connectivity: SDIO, CE-ATA, eMMC, UART’s, SPORT’s, SPI and TWI
- Lockbox™ Secure Technology: Hardware-enabled security for code and content protection
- Memory controller providing glue-less connection to multiple banks of external SDRAM, SRAM, Flash, or ROM
- 176-p, 0.5 mm pitch, 24 X 24 LQFP (Industrial temperature range -40°C to +85°C)
- 168-ball, 0.8 mm pitch, 12x12 mm CSP-BGA (Commercial temperature range 0°C to +70°C)
Micrium has one project targeted to this board. The project corresponding to AN-1518 uses µC/OS-II and µC/Probe. The user LEDs blink, controlled by push button switches or by a given delay. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page. |
AN-1530: Download
Download
|
 |
ADuC7026 Evaluation Board
The ADuC7026 Development Board includes
- Analog Devices ADuC7026 (ARM7) MCU
- Demo circuit with potentiomter and LED
- User LED
- User push button
- Serial (RS-232) interface
- Reset button
Micrium has one project targeted to this board. The project corresponding to AN-1726 uses µC/OS-II and µC/Probe. The user LED and DAC output LED (in the demo circuit) blink, controlled by the potentiometer and push button, respectively. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page. |
AN-1726:
Download
Download
|
